Thread Rolling Machines: Side-By-Side Comparison
| Specifications | 175 | 200 | 230 | 236 | 320 | 440 | 635 | 645 | 840 | 1015HS | 2830HS | 4840HS | |||
| Type of Feed: | Standard | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Thrufeed Only | Thrufeed Only | Thrufeed Only | |||
| Capacity | |||||||||||||||
| Max. Diameter | 2" | 2" | 2-1/2" | 2-1/2" | 3" | 4-1/2" | 6" | 6" | 24" DIA. Infeed-16". Dia. Thrufeed | 1-1/8" | 4" | 6" | |||
| Min. Diameter | 5/8" | 7/8" | 1-1/4" | ||||||||||||
| Rolling Pressure Adjustable to: |
Adj. to 18,000 LBS. | Adj. to 24,000 LBS. | Adj. to 40,000 LBS. | Adj. to 60,000 LBS. | Adj. to 80,000 LBS. | Adj. to 125,000 LBS. | Adj. to 160,000 LBS. | Adj. to 235,000 LBS. | Adj. to 650,000 LBS. | Adj. to 25,000 LBS | Adj. to 60,000 LBS | Adj. to 150,000 LBS | |||
| Motors | |||||||||||||||
| Spindle Drive |
7-1/2 HP | 15 HP | 30 HP | 40 HP | 30 HP - 4 Speed 40 HP - Variable | 40 HP -4 Speed 60 HP - Variable | 40 HP -4 Speed 75 HP - Variable | 50 HP -4 Speed 75 HP - Variable | 100 HP Variable | 15 HP | 30 HP | 50 HP | |||
| Hydraulic | 2 HP | 2 HP | 2 HP | 3 HP | 5 HP | 5 HP | 10 HP | 10 HP | 30 HP | 3 HP | 3 HP | 7-1/2 HP | |||
| Coolant | 1/4 HP | 1/4 HP | 1/4 HP | 1/4 HP | 1/4 HP | 1/2 HP | 1/2 HP | 1/2 HP | 3/4 HP | 1/4 HP | 1/4 HP | 1/2 HP | |||
| Controls: | n/a | n/a | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |||||
| Dies |
|||||||||||||||
| Max. Diameter | 4-1/2" | 6" | 7-5/8" | 7" | 8" | 9" | 10" | 10" | 16" | 4-1/2" | 6-1/2" | 9" | |||
| Max. Die Face Width | 2-1/2" | 3-1/2" | 6" | 6" | 5-1/2" | 8" | 7-1/2" | 7-1/2" | 15" | 2-3/8" | 3-1/2" | 8" | |||
| Standard Spindle Size (Other Sizes Available) |
1-1/4" | 1-1/2" | 2-1/8" | 2-1/2" | 2-1/2" | 3" | 3-1/4" | 3-1/4" | 5-1/2" | 1-1/2" | 2-1/4" | 3-1/4" | |||
| Hydraulic Capacity | 20 GAL | 30 GAL | 30 GAL | 30 GAL | 50 GAL | 50 GAL | 80 GAL | 80 GAL | 100 GAL | 50 GAL | 50 GAL | 50 GAL | |||
| Coolant Capacity | 20 GAL | 50 GAL | 50 GAL | 50 GAL | 80 GAL | 120 GAL | 120 GAL | 120 GAL | 200 GAL | 200 GAL | 120 GAL | 300 GAL | |||
| Spindle Speeds | Variable | Variable | Variable | Variable | Variable or 4 Speed Manual |
Variable or 4 Speed Manual |
Variable or 4 Speed Manual |
Variable or 4 Speed Manual |
Variable | 4 Speed Manual | 4 Speed Manual | 4 Speed Manual | |||
| Spindle RPM | 45 - 360 (Other Speeds Available) | 45 - 200 (Other Speeds Available) | 45 - 200 (Other Speeds Available) | 50 - 200 (Other Speeds Available) | 28 - 170 (Other Speeds Available) | 15 - 180 (Other Speeds Available) | 8 - 196 (Other Speeds Available) | 8 - 196 (Other Speeds Available) | 2 - 50 (Other Speeds Available) | ||||||
| Floor Dimensions |
|||||||||||||||
| Width | 45" | 56" | 56" | 77" | 76" | 92" | 87" | 87" | 216" | 78" | 86" | 96" | |||
| Length | 48" | 66" | 66" | 87" | 96" | 102" | 113" | 113" | 255" | 88" | 78" | 114" | |||
| Height | 46" | 62" | 62" | 67" | 52" | 68" | 52" | 52" | 90" | 66" | 72" | 96" | |||
| Net Weight | 3,000 LBS | 3,000 LBS. | 3,000 LBS. | 7,500 LBS. | 9,000 LBS. | 16,000 LBS. | 20,000 LBS | 21,000 LBS | 96,000 LBS. | 9,500 LBS. | 12,000 LBS. | 25,000 LBS. | |||
| Voltage | All models wired to NMTBA standards for operation on 230 or 460 VOLTS, 3 Phase, 60 HERTZ. Other voltages available at additional cost. | ||||||||||||||
| Warranty | One year on defects in material and workmanship. This covers parts only, labor not included. For component parts not manufactured by Tesker Manufacturing Corporation, the original manufacturer's warranties will apply. |
||||||||||||||
| Specifications subject to change without notice. | |||||||||||||||
Click here to download a pdf of the machine side-by-side comparison.
Home l Why Thread Rolling l Thread Rolling Machines l Fixturing l Dies & Regrinding l Quotes & Ordering l Literature l Contact l Site Map
Copyright © 2010 Tesker Manufacturing Corporation. All rights reserved.
