Front 'L' Support including
Front Bar Feed Fixture

Adjustable work holding fixture that attaches to front of machine.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 840

STANDARD ON:
Model 635
Model 645

Thread Length Control Limit Switch

Used when rolling threads on part of a rod. The rod is thrufed until it bumps the limit switch and the head opens up. The limit switch can be positioned from behind the dies to the gear boxes at rear of machine allowing a thread length anywhere in this range. Available on hydraulic machines only.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645

PLC Memory Module

Protects against program loss
caused by power failure to PLC Microprocessor.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 840

Spring Loaded Rear Stop

Spring loaded part stop positions part to the desired location for infeed rolling and is spring loaded for slight part movement.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440

STANDARD ON:
Model 635
Model 645
Model 840

Radial Die Line-Up Coupling

Permits separate rotational adjustment of one spindle to the other for matching of infeed or helical slow feed dies, keeping die faces even when desired. Dies can be matched laterally, but when infeed rolling close to a shoulder, rotational line-up is desirable. Helical slow feed should only be radially lined up. Coupling is not needed for the normal infeed or thrufeed rolling.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 840

Spindle RPM Tachometer

Reads the RPM of the spindle.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236

STANDARD ON:
Model 320
Model 440
Model 635
Model 645
Model 840

Enclosed Toe-in Indicator

Gives a reference for adjusting the left main head die for part taper.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 840

Hydraulic Slow Release Valve

AVAILABLE ON:
Model 320
Model 440

STANDARD ON:
Model 635
Model 645
Model 840

Part Hold Down
with Spring Loaded Stop

Hand operated holds part on support blade so fingers are at a safe distance during rolling.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645

Upper Support Holder

Captures material between dies and work support blades for running high-speed studs and threaded rod.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645

Oil 1 Shot Manual Lubrication Unit

Hand pump oiler for the feed slide.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 1015HS
Model 2830HS
Model 4840HS

Versa III Auto Oil Lubrication System

Fully automatic feed slide oil system.

Click on image for a larger view.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440

STANDARD ON:
Model 635
Model 645
Model 840
Model 1015HS
Model 2830HS
Model 4840HS

Outboard Roller Supports

Behind the spindle support blocks. Gives more part clearance (large head bolts, etc.)

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645

Feeding and Receiving Fixtures

Many types of feeding, receiving and holding fixtures are available. These are usually fit to the individual customers needs, types of parts being rolled and the production needed.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 840
Model 1015HS
Model 2830HS
Model 4840HS

Center Stands

Supports the center tube.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 1015HS
Model 2830HS
Model 4840HS

Center Support Tube

Contains parts out the back of machine.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 1015HS
Model 2830HS
Model 4840HS

Coolant Removal Ring

Cleans coolant off parts as they go through the center tube.

AVAILABLE ON:
Model 175
Model 200
Model 230
Model 236
Model 320
Model 440
Model 635
Model 645
Model 1015HS
Model 2830HS
Model 4840HS

For more information on any of our optional features, please contact our Sales Department.