- Careers
- Contact Tesker
- (262) 675-6505
-
Thread Rolling Machines Comparison
A Side-by-Side Look at Applications & Advantages
| Specifications | 200E | 215E | 35E | 236E | 280E | 320E | 380E | 440E | 645E | 740E | 840E | 1015E | 2830E | 4840E |
| Type of Feed: | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed | Infeed & Thrufeed |
| Capacity | ||||||||||||||
| Max. Diameter | 2.5" | 2.5" | 3" | 3" | 2-1/2" | 4" | 4" | 4-1/2" | 6-3/4" | 12" Infeed/10" thru | 24" | 1-1/2" | 5" | 6-1/2" |
| Min. Diameter | 5/8" | 7/8" | 1-1/4" | |||||||||||
| Rolling Pressure | Adj. to 25,000 lbs. | Adj. to 40,000 lbs. | Adj. to 40,000 lbs | Adj. to 75,000 lbs. | Adj. to 60,000 lbs. | Adj. to 100,000 lbs. | Adj. to 100,000 lbs. | Adj. to 200,000 lbs. | Adj. to 300,000 lbs. | Adj. to 450,000 lbs. | Adj. to 650,000 lbs. | Adj. to 40,000 lbs. | Adj. to 75,000 lbs. | Adj. to 200,000 lbs. |
| Motors | ||||||||||||||
| Spindle Drive | 20 HP | 20 HP | 30 HP | 40 HP | 40 HP | 40 HP | 40 HP | 60 HP | 92 HP | 92HP | 100 HP | 20 HP | 60 HP | 60 HP |
| Hydraulic | N/A | N/A | N/A | 3 HP 30 Gal | N/A | 5 HP 50 Gal | N/A | 5 HP 50 Gal | 10 HP 80 Gal | 20 HP 80 Gal | 30 HP 100 Gal | 3 HP 50 Gal | 3 HP 50 Gal | 7-1/2 HP 50 Gal |
| Coolant | 1/4 HP 40 Gal | 1/4 HP 40 Gal | 1/4 HP 80 Gal | 1/4 HP 75 Gal | 1/4 HP 50 Gal | 1/4 HP 75 Gal | 1/4 HP 75 Gal | 1/2 HP 90 Gal | 1/2 HP 100 Gal | 3/4 HP 120 Gal | 3/4 HP 200 Gal | 1/4 HP 200 Gal | 1/4 HP 200 Gal | 1/2 HP 250 Gal |
| Dies | ||||||||||||||
| Max. Diameter | 6" | 6" | 7-1/2" | 7-5/8" | 8" | 8" | 8" | 9" | 10" | 12" | 16" | 4-1/2" | 6-1/2" | 9" |
| Max. Die Face Width | 4-1/2" | 4-1/2" | 6" | 6" | 5-1/2" | 5-1/2" | 5-1/2" | 8" | 10" | 12" | 15" | 2-3/8" | 3-1/2" | 8" |
| Standard Spindle Size (Other Sizes Available) | 2" | 2" | 2-1/2" | 2-1/2" | 2-1/2" | 2-1/2" | 2-1/2" | 3" | 3-1/4" | 4-3/4" | 5-1/2" | 1-1/2" | 2-1/4" | 3-1/4" |
| Spindle Speeds | Variable | Variable | Variable | Variable | Variable | Variable | Variable | Variable | Variable | Variable | Variable | 6 Speed Manual | 6 Speed Manual | 4 Speed Manual |
| Spindle RPM (Other Speeds Available) | 0 - 153 | 0 - 153 | 30-150 | 30 - 150 | 1-100 | 0 - 128 | 0-119 | 0 - 119 | 0-77 | 0-85 | 2 - 50 | 150 - 490 | 41 - 217 | 31 - 83 |
| Floor Dimensions | ||||||||||||||
| Width | 60" | 60" | 62" | 83" | 84" | 83" | 94" | 93" | 101" | 158" | 216" | 78" | 96" | 100" |
| Length | 84" | 84" | 84" | 94" | 88" | 94" | 92" | 115" | 120" | 155" | 255" | 88" | 133" | 148" |
| Height | 82" | 82" | 75" | 84" | 77" | 84" | 77" | 90" | 94" | 106" w/crane | 106" w/crane | 66" | 100" | 103" |
| Net Weight | 5,500 lbs. | 5,500 lbs. | 7,600 lbs | 12,000 lbs. | 10,500 lbs. | 12,000 lbs. | 12,500 lbs. | 16,000 lbs. | 20,500 lbs. | 46,000 lbs. | 96,000 lbs. | 12,000 lbs. | 20,000 lbs. | 35,000 lbs. |
| Voltage | All models wired to NFPA 79 standards for operation on 240 or 480 volt, 3 phase, 60hz. Other voltages available at additional cost. | |||||||||||||
| Fixturing | Please be advised that fixturing and additional guards may be needed, depending on job being rolled. Tesker Manufacturing Corporation assumes no liability for fixturing or guards designed, manufactured or installed by anyone other than Tesker Manufacturing Corporation. | |||||||||||||
| Specifications subject to change without notice. | ||||||||||||||
© 2026 Tesker Manufacturing Corporation, Saukville, WI • Privacy Policy • (262) 675-6505